Step-by-Step Guide to Threading a Janome Sewing Machine: Tips and Tricks

Threading a Janome sewing machine might seem tricky, but it’s not as daunting as you might think. With the right guidance, you’ll be threading your machine like a pro in no time.

This article will walk you through the process step-by-step, ensuring you understand each part of the threading process. Whether you’re a beginner or an experienced seamstress, these tips will have your Janome machine threaded and ready for your next sewing project.

Remember, practice makes perfect. So don’t get discouraged if you don’t get it right on your first try. Keep at it and soon, threading your Janome sewing machine will be second nature.

Threading a Janome sewing machine correctly is essential for achieving smooth stitching and preventing machine issues. Janome’s official website provides an official guide that outlines step-by-step instructions for threading their models, ensuring users can start their sewing projects without hitches. Video tutorials on YouTube offer visual aids on threading Janome machines, which can be particularly helpful for visual learners. For more comprehensive sewing tips and tricks, including troubleshooting common issues, Sewing Mastery hosts a series of tutorials covering various Janome sewing machines.

Understanding the Parts of a Janome Sewing Machine

Before you can become proficient at threading your Janome sewing machine, it’s crucial to familiarize yourself with its key components. From bobbin to presser foot, each part plays a dynamic role in the sewing process.

Beginning with the bobbin, this small spool holds the lower thread. It’s housed inside the bobbin case underneath the needle plate. It’s an integral part of the stitch-making process. Once you fill it with thread, it works in harmony with the upper thread from the spool to create the stitches.

Next comes the bobbin case. It neatly contains the bobbin and provides tension to the lower thread. When you’ve threaded the machine correctly, the bobbin thread will rise and connect with the upper thread to form a tight, perfect stitch.

The presser foot is a moveable part that holds down the fabric while sewing. It helps keep your material in place and determines how well your stitches are formed. Different sewing projects call for different presser feet, so it’s worth understanding which foot works best for your specific needs.

At the top of the machine, you’ll find the spool pin, a platform on which the upper thread spool rests. It helps unwind the thread smoothly during operation. It’s your source of the upper thread that combines with the bobbin thread to create the stitches, and that’s why a flawless threading process is essential.

Finally, the take-up lever, located on the front side of your Janome machine, is essential to ensure that the thread loops over it to create consistent stitches. This part moves upwards and downwards during sewing, pulling the thread off the spool while feeding it through the machine.

Each of these elements plays a part in the threading process. Knowing where they are and how they function will build your confidence when you’re threading your Janome sewing machine. Let’s go through each step one-by-one in the next session, “Step-by-Step Guide to Threading Your Janome Sewing Machine”. Knowledge is power, so let’s put that power to work by threading your machine with precision and ease.

Gather the Necessary Supplies

Threading a Janome sewing machine is an intricate process that requires a specific set of tools. The following items should be at your ready:

  • Spool of thread
  • Bobbin
  • Sewing machine needles
  • Thread cutter or scissors

A spool of thread is an obvious necessity. You’ll want to have high-quality thread that’s suitable for your particular sewing project. The thread’s color and thickness will depend on the fabric you’re working with and the final look you’re trying to achieve.

Your bobbin is the small spool that holds the bottom thread. It’s crucial for the formation of secure and even stitches. Check that your bobbin is clean and free of lint or residual thread. It needs to fit snugly within the bobbin case of your sewing machine.

You won’t get far without sewing machine needles. We recommend having a variety to handle different textures and thicknesses of fabric. Be aware of the size and type of needle required for your project. If you find the thread is breaking or the stitches are uneven, it’s a good indicator that you’re not using the right needle for your job.

Having a thread cutter or scissors can also prove nifty during the threading process. It helps to cleanly cut threads ensuring they don’t fray and disrupt the threading of your machine.

Next, let’s dive deeper into how to place the thread in the correct passage of the Janome sewing machine. Because knowing your tools is excellent, but true power lies in learning how to skillfully operate them.

Preparing the Bobbin

First, disconnect your Janome sewing machine from any power source. Safety is paramount in every activity. Now, grab the bobbin mentioned earlier in the article.

Ensure it’s clean and free from any visible debris. Any lint or fluff might interfere with the smooth operation of your machine. Take note of the bobbin orientation. It usually plays an essential role in how the bobbin fits into the bobbin case.

Position your selected high-quality thread on the spool pin. If it’s not already there from your previous sewing session, it’s time to make the necessary arrangements. The type of thread and the project at hand always dictate the choice here.

Keep in mind that thicker fabrics like denim require tougher thread like nylon or polyester.

It’s also time to unwind some of the thread. Aim for 15-20 inches. You’ll wrap this around the bobbin. The direction of the wrap is crucial. In most cases, the thread wraps around the bobbin in a clockwise direction.

Next, you’ll want to place the bobbin on the bobbin winding shaft. Push it to the right until it clicks into place. This position activates the bobbin winding mechanism on most Janome sewing machines. With your right hand, hold the free end of the thread. Turn on the sewing machine. At a moderate speed, press the foot control to start winding the bobbin.

You’ll see it fill up as the thread from the spool wraps around the bobbin. Stop winding when you deem the amount of thread sufficient for your sewing project. Remember to leave a bit of extra thread. It helps in case of any unexpected events requiring additional thread during sewing.

Cut the excess thread, leaving an inch or, better yet, an inch and a half. You’re now ready to remove the bobbin from the bobbin winding shaft and move on to setting up the top thread, another important aspect in threading your Janome sewing machine.

Threading the Upper Thread

Once the bobbin is prepped, threading the upper part of the Janome sewing machine comes next. This step demands a high level of precision to ensure optimal sewing performance.

Place your chosen spool of thread on the spool pin at the top of the machine. Most machines have a diagram on the body for threading but if your Janome lacks one, let each of your steps be guided.

Start by directing the thread from your spool through the top guide. You’ll know this one as it’s usually a small metal loop located near the spool pin. Threading should be from the back to the front for a proper engagement.

Next, pull the thread down to the tension mechanism. It’s this contraption that regulates the amount of thread used by your machine. Go around it, making sure the thread slides into the disk’s slot. To ensure it’s seated correctly, pull the thread back up.

Find the take-up lever. Thread it from the left to the right by going through the eye of the lever. Ensure the thread goes all the way through to prevent thread bunching during sewing.

Direct the thread downwards to where the needle is. Moving further, you’ll find a guide above the needle. Thread this guide by moving the thread from the left to the right.

The final step is threading the needle itself. Threading the needle in a Janome sewing machine is ideally from the front to the back. If this step presents some difficulty, a needle threader might come in handy to make the task easier.

Remember that threading an upper thread doesn’t have to be troublesome. Take your time, familiarizing yourself with each part and step. And don’t forget — keep your thread tension consistent. Consistency is key to attain that smooth, even stitch.

Adjusting the Tension

Now that you’ve completed the threading process, let’s dig into adjusting the tension on your Janome sewing machine. Mastering tension adjustments can make a world of difference in your sewing projects, giving you the ability to create smooth, even stitches every time.

First, it’s vital to know that your Janome machine has two primary types of tension controls – the upper thread tension and the bobbin thread tension. Both are exceptionally crucial for balanced stitches.

For the upper thread tension, you’ll spot a dial on the front of your sewing machine. Standard setting for most fabrics is about 4 or 5. But don’t be afraid to adjust this as needed. Lighter fabrics might require a lower setting, while heavier ones may need it to be higher.

On the other hand, the bobbin thread tension is less frequently adjusted. You’ll find a screw on the side of the bobbin case for this purpose. Turning the screw slightly to the right increases the tension, while turning it to the left decreases it.

Here’s a pro tip: Always try to get the tension right with the upper thread tension control first before adjusting the bobbin tension. Bobbin adjustments can be trickier to fine-tune and should be your last resort.

In terms of knowing whether your tension is right, well, the fabric is your guide. If you notice the top thread being visible from the bottom side or the bobbin thread coming up to the top, it’s a clear sign that your tension needs adjustment.


You’ve now got all the tools and knowledge needed to thread a Janome sewing machine like a pro. Remember, the right supplies such as quality thread, clean bobbin, and appropriate needles can make all the difference. Threading involves careful preparation of the bobbin and precise threading of the upper part of the machine. Don’t forget about the importance of maintaining proper tension – it’s crucial for smooth, even stitches. With time and practice, you’ll master these steps and adjustments. So, go ahead and thread your Janome sewing machine with confidence. Happy sewing!

What are the necessary supplies for threading a Janome sewing machine?

The supplies include a spool of thread, bobbin, sewing machine needles, and a thread cutter or scissors. It’s important to use high-quality thread suitable for the specific sewing project, and ensure the bobbin is clean and fits snugly within its case.

How do you prepare the bobbin for threading?

First, disconnect the machine from any power source. Ensure the bobbin is clean and free from debris. Select the suitable thread for your project, and wrap it around the bobbin in a clockwise direction. You then place the bobbin on the winding shaft and activate the bobbin winding mechanism. Leave extra thread and cut the excess before moving on.

How do you thread the upper part of the Janome sewing machine?

Place the spool of thread on the spool pin, thread through the top guide, tension mechanism, take-up lever, guide above the needle, and finally the needle itself. Familiarize yourself with each step and maintain consistent thread tension for smooth stitches.

How do you adjust the tension on a Janome sewing machine?

There are two types of tension controls: the upper thread tension and the bobbin thread tension. Use the dial on the machine’s front for the upper thread tension, and the screw on the bobbin case side for the bobbin tension. Start with the upper thread tension and adjust the bobbin tension as a last resort. Assess the stitches to determine if the tension needs adjustment.